GAUTEN UAV Fixed-Wing Drone Catapult Launcher

This catapult launcher is listed for fixed-wing UAVs. Review the launch-weight range, mechanical launch speed and setup dimensions; confirm aircraft attachment, propulsion and operating procedures before use.

Payload space & installation

Designed for mainstream fixed‑wing UAVs

Listed performance & conditions

Flight performance: Use the source-listed values in the table as a starting point. Confirm propulsion, payload, power or fuel load, weather and test conditions for your final system.

Foldable & Portable

Deployed 6.2m, folded only 2.2m

Ground setup requirements

Operating conditions: Review the listed limits and ask for supporting evidence. Assess wind, temperature, terrain and local permissions for the complete system.

Equipment protection: Confirm mounting, vibration isolation and environmental protection for your chosen sensor. No enclosure rating is verified here.

Mapping and aerial inspection: Define the data or inspection output first. Select the sensor, positioning, processing workflow and flight plan together; no completed integration is implied.

Battery and power: Ask for a wiring diagram and the specified voltage, cell count, capacity and connectors for this package. Confirm these together before choosing a battery.

Product Specifications

Recommended Launch Weight	30‑50kg
Launch Speed	9‑15m/s (UAV’s own thrust not included)
Launch Angle	6°‑8° (adjustable)
Deployed Length	6200mm
Deployed Height	880mm
Rail Length	5500mm (from release point to stop point)
Rail Width	380mm
Folded Dimensions	2200×570×620mm
Launcher Weight	approx. 220kg
Power Type	Rubber band
Number of Rubber Strands	8 strands
Release Method	Cable‑controlled pull‑cord release
Reset Method	Electric winch reset
Winch Power Supply	12V 80AH lead‑acid battery (user‑supplied)
Operating Temperature	‑20 to 60°C
Protection Rating	IP54
Wind Resistance	≥ Force 6
Ground Adaptability	Hard / soft / slope
Material	High‑strength aluminium alloy
Deployment/Retrieval Time	approx. 10 min
Operator Requirement	≥3 persons
Transport Mode	Vehicle‑mounted
Compatible UAV Types	Fixed‑wing (cradle & mounting points must be customised per model)
Gross Package Weight	approx. 260kg
Package Dimensions	240×67×77cm
Delta-wing mount dimensions	Length: 73.5 cm Width: 68 cm
Standard fixed-wing mount dimensions	Length: 40 cm Width: 27 cm

Configuration review: Check the listed specifications and package contents for Catapult Launcher | Fixed Wing Drone specific launch platformSystem. Confirm the required equipment and evidence with sales.

Frequently Asked Questions

Q1: My UAV weighs exactly 50kg – can the launcher safely launch it?

A weight within the listed range does not confirm a safe launch. Share the aircraft mass, center of gravity, attachment points and required launch speed for a model-specific review.

Q2: Does the launch speed of 9‑15m/s include the UAV’s own motor/engine thrust?

The listed mechanical launch speed excludes the aircraft’s own propulsion. Confirm the launch setup for the final aircraft weight and required flying speed.

Q3: What if the battery runs out in the field? Is the battery mandatory for reset?

The table lists an electric winch reset and a user-supplied battery. Confirm the reset procedure and power requirements before field use; do not assume a manual reset is supported.

Q4: Can it be used on soft ground (grass, sand) or slight slopes? How to ensure launch direction stability?

Assess ground bearing strength, slope, anchoring and launch alignment for the site. Ask for the setup procedure and limits; the listed ground types are not approval for every location.

Q5: Does the 10‑minute deployment/retrieval (3 operators) include cradle modification and UAV mounting?

Ask what the listed setup time includes. Custom cradle work and aircraft mounting must be agreed separately; they should not be assumed to fit within the listed deployment time.

Q6: What is the service life of the rubber bands? How to inspect them?

Ask for the rubber-band inspection, storage and replacement criteria. Service life depends on condition and use; no fixed replacement interval is verified here.

Q7: What if the UAV gets stuck on the rail or the release hook doesn't disengage during launch?

Stop using the launcher if the rail, cradle or release mechanism binds. Request the inspection and fault-clearing procedure before attempting another launch.

Q8: Can it work in rain or high humidity with the listed protection rating?

The original table lists a protection rating. Request its scope and supporting evidence, including the winch and electrical parts, before planning use in rain or humidity.

Q9: How long does one electric winch reset take? How many resets can a 12V 80AH battery support?

Ask for the reset cycle time and measured power use for the supplied winch. Battery capacity alone does not establish a reliable number of resets.

Q10: Can the folded size (2200×570×620mm) fit into a regular SUV or pickup?

Compare the listed folded dimensions and weight with the vehicle’s opening, load space, payload limit and loading equipment. Do not assume it fits a standard SUV or pickup.

Q11: What data do I need to provide for custom cradle/mounting? Will it affect the UAV’s CG?

Provide the aircraft mass, center of gravity, structure drawings and mounting points. Agree the cradle design and check attachment loads and balance before use.

You May Also Like

Performance evidence: Ask which configuration and test conditions produced the listed values. Do not treat maximum figures as guaranteed results for every payload.

GAUTEN UAV Mosquito SM200G

Payload installation: Check the listed bay dimensions and payload limit. Sensor fit also depends on mounts, balance, power and data interfaces; compatibility must be confirmed.

2000mm wingspan 35kg MTOW

View Details

Performance evidence: Ask which configuration and test conditions produced the listed values. Do not treat maximum figures as guaranteed results for every payload.

GAUTEN UAV S360 3600mm

Sensor review: Check mounting access, center of gravity, cable routing and power demand with the payload installed. Ask who will verify the complete setup.

Airframe construction: Review the listed material, dimensions and structural parts. Ask for model-specific drawings and inspection information; material alone does not prove weather resistance or service life.

View Details

Fixed-wing cradle example

Watch product video on YouTube ↗

Delta-wing cradle example

Watch product video on YouTube ↗

Lead Time & Order Notice

• Production and shipping: Ask for the current production schedule, packing details and freight estimate. Delivery depends on the selected package and destination.
• Delivery planning: Confirm the destination, freight method and packing before setting a project delivery date.
• Availability and shipping: Request a current quote and production schedule. Confirm freight separately; ready stock is not promised.

www.uavmodel.com